Telegram
Вконтакте
Дзен
Youtube
RutubePillar jib crane double-arm and with the manual slewing KKR4
The pillar jib crane double-arm and with the manual slewing designed for mechanization of work on lifting and moving various loads. These cranes can be used both indoors and outdoors at ambient temperatures from -20°C to +40°C (-40°C on request).
The design of the boom of this jib crane allows you to increase the working area and perform specific operations, such as moving cargo through doorways and over obstacles, as well as lifting loads in hard-to-reach places. The main part of the boom can rotate 180°, and the auxiliary part can rotate 270°.
Our company produces pillar jib crane double-arm and with the manual slewing according to TU-31 5920-006-87879481-2023 with a lifting capacity of up to 0.5 tons, a boom reach of up to 4.0 meters and a lifting height of up to 8.0 meters. The hoist in this type of crane can only be used stationary, that is, not mobile.
| Option Name | Option Description |
| Load Limiter | Serves as an additional safety device alongside limit switches and load drop protection devices in case of phase failure. Typically installed when handling various loads with unknown weights. If the load exceeds the hoist’s capacity, the limiter halts the lifting process. Available for cranes equipped with an electric hoist as the limiter is mounted on the hoist’s lifting mechanism. |
| Sound and Light Alarms | Activated when the jib crane is switched on, warning employees to leave the danger zone. Depending on workplace conditions, either light or sound alarms are recommended. Available only for electric jib cranes. |
| Radio Control | Allows remote control of the crane using a remote controller. Available for electric jib cranes or cranes equipped with an electric hoist. The delivery includes a 6-button remote controller with an emergency stop button and a radio signal receiver (mounted on the hoist or near the crane’s control box). |
| Motor with Brake for Jib Rotation | The integrated brake stops the jib at the desired position without inertial movement. Manual fixation at a precise point is impossible. The brake is hidden within the motor-reducer system. Recommended for cranes with outdoor placement categories U1 and U2 to prevent unintended jib movement in parking position during strong winds or other external factors. |
| Hoist Parking Canopy for Outdoor Use | Used for cranes in outdoor placement category U1 to protect the electric hoist from direct precipitation. Recommended by crane and hoist manufacturers since standard hoist designs typically lack alternative precipitation protection. |
| Full Span Hoist Canopy for Outdoor Use | Protects the electric hoist across the full span of the crane in outdoor placement category U1. Recommended by crane and hoist manufacturers for additional precipitation protection. |
| Power Cut-Off Switch on Crane Column | Enables switching crane power on and off. Located approximately 1500 mm from the lower flange of the crane. Consists of a two-button post housed in a protective (metal) casing. |
| Electric End Switches for Hoist Travel on Jib | Used to limit the travel distance of the electric hoist along the crane’s jib. |
| Anchor System for Crane Foundation Fixation | This option applies during the installation phase. Anchors secure the crane to its foundation. For prepared foundations, an anchor system is typically offered. For unprepared foundations, mounting studs are used instead. |
| Load Drop Protection Device for Phase Failure | An additional safety device alongside load limiters and limit switches. |
| Crane Operation Parameter Recorder | Records crane operating conditions, including modes, duration, and load capacity. Installed only on cranes equipped with electric wire rope hoists. |
| Crane Operation Time Indicator | Tracks crane operation time to schedule maintenance, minor repairs, and major overhauls. Integrated into or mounted on the control box door. |
| Frequency Regulation for Jib Rotation Speed | A frequency converter installed in the control box allows for adjustable jib rotation speed within a specified range. Also enables smooth start and braking. |
| Engine Cooling System | Recommended when installing a frequency converter, which significantly reduces the standard movement speed of the crane, to prevent motor overheating. |
| Input Choke | Smooths voltage spikes and reduces amplitude fluctuations in the AC supply. Reduces current ripple amplitude consumed by the frequency converter. |
| Platform and Ladder for Hoist and Crane Maintenance | For jib cranes taller than 3 meters, it is recommended to include maintenance access solutions such as a horizontal platform at human height from the jib and a ladder welded to the crane column. This facilitates hoist maintenance, oil changes, and other service operations. |
| Heated Crane Control Box | Enables jib crane operation at air temperatures down to -20°C. Mandatory for cranes operating below -10°C. Requires the additional installation of a frequency converter. |
The “Gruzopodem” company is a modern factory in Kazan with an area of 17,000 m², where more than 1,000 overhead, cantilever, and gantry cranes, as well as other equipment, are manufactured annually. The factory is equipped with its own certified laboratories for destructive and non‑destructive testing, which, among other things, guarantees the high quality of products at every production stage: from incoming material inspection to the release of the finished product. We strictly comply with industry standards and have a Certificate of Welding Technology Certification issued by the National Welding Control Agency. Based on the results of an independent study, our company was included in the TOP‑5 largest crane manufacturers in Russia and was recognized as the best exporter in the Republic of Tatarstan in the industrial sector. In 2025 and 2026, the overhead cranes produced by our company became laureates of the republican competition “Best Goods and Services of the Republic of Tatarstan” in the “Products for Industrial and Technical Use” category, and also received diplomas at the federal stage of the “100 Best Products of Russia” program.*
*More details about the company’s diplomas, awards, and the results of independent studies:
https://грузоподъем.рф/awards.
We provide a full cycle of work
Documents for carrying out activities
Кран консольный на колонне двухплечевой ККР4, особенности конструкции и эксплуатации
- Применяется для подъема и перемещения любых грузов массой до 0,5 тонн
- Монтируется на бетонный фундамент посредством опорного фланца и анкерных болтов
- Поворот стрелы ручных кранов осуществляется посредством оттяжки
- Механизмом подъема и перемещения груза является тельфер (таль)
- Подъем, опускание груза происходит вручную либо при помощи электрической передвижной тали и пульта управления
- Преимуществом кранов консольных специальных перед мостовыми кранами является удобство работы в условиях ограниченной рабочей зоны, легкость монтажа, отсутствие необходимости обеспечения подкрановыми путями
- Краны консольные двухплечевые имеют особую конструкцию, благодаря которой стрела крана может обеспечить подъем и перемещение грузов в труднодоступных местах.
Если Вы хотите купить кран консольный двухплечевой, произвести ценовой расчет данного типа крана, уточнить комплектацию или узнать информацию о дополнительных опциях — звоните в офисы продаж ООО «Грузоподъем» по телефонам, указанным на сайте.
Завод «Грузоподъем» имеет всю разрешительную документацию на производимое оборудование. Помимо изготовления самого крана наша компания осуществляет доставку и монтаж оборудования на предприятии Заказчика.
What our clients say about us